|
TW-1364 High Speed Vertical Machining Centers
TW-1364 SPECIFICATION
MODEL | TW-1364 |
Travel | |
X axis (Longitudinal) | 1300 (51") |
Y axis (Cross) | 640 (25") |
Z axis (Vertical) | 640 (25") |
Spindle nose to table surface | 140-780 (5"-30") |
Table | |
Table dimension | 1,450 x 620 (57" x 24") |
T-slots wide x; no. x pitch) | 18 (0.7") x 5 x 125 (4.92") |
Table load apacity | 1000kgs (2202 lbs) |
Headstock | |
Spindle nose (BT/CAT/ISO) | 40 Taper |
Spindle RPM (#40 Taper) | 8,000 / 10,000 (opt.) / 12,000 (opt.) |
Feedrate | |
Rapid traverse for X, Y, Z axis | 32 x 32 x 32 m./.min |
Cutting feed for X, Y, Z axis | 1-10,000 mm./.min (0.04-400 ipm) |
Motors | |
Main motor #40 (cont./30min) | 11Kw / 15 Kw |
AC servo motor for each axis | X, Y : 3 Kw - 12 NM / Z : 4 Kw - 22 NM |
Coolant system | 580 W |
Lubrication system | 25 W |
Spindle chiller system | 850 W fpr spindle over 8,000 RPM |
Automatic tool changer | |
Magazine for armless type | 16 / 20 tools |
Magazine for arm type | 24 / 32 / 40 tools |
Max. tool diameter | #40 : 70 / 127 (3" /5") |
Max. tool length | #40:300 (11.8") |
Max. tool weight | #40: 7 kgs (15lbs) |
Accuraccy | |
Positioning | ±0.005 mm / ±0.0002" |
Repeatability | ±0.005 mm / ±0.0002" |
General information | |
Air pressure | 5Kg / cm² over |
Machine weight | 5,860 kgs (12,900lbs) |
Floor space (L x W x H) | 3,260 x 3,740 x 2,840 (128" x 147" x 112") |
CNC controller | Fanuc Oi/31i, Meldas M70, Heidenhiem |
All specifications and designs are subject to change without notice.
Standard equipment |
|
Optional accessories |
Full enclosure guard |
Automatic power off (M30) |
10,000 / 12,000rpm spindle with chiller |
Turning operation panel |
Automatic lubrication system |
Coolant thru spindle preparation |
Rigid tapping |
Spindle air purge system |
Chip flushing system with high |
MPG (hand wheel) |
Spindle air blow system | pressure pump |
Halogen work light |
Coolant system with coolant tank |
Chain type chip conveyor with bucket |
Leveling bolts and blocks |
Heat exchanger of electrical cabinet |
4th axis interface |
Beacon light |
Tool box for machine set up |
Transformer |